Effect of nanostructuration on compressibility of cubic BN

Compressibility of high-purity nanostructured cBN has been studied under quasi-hydrostatic conditions at 300 K up to 35 GPa using diamond anvil cell and angle-dispersive synchrotron powder X-ray diffraction. It has been found that the data fit to the Vinet equation of state yields the values of the bulk modulus B₀ of 375(4) GPa with its first pressure derivative B₀´ of 2.3(3), thus, the nanometer grain size (≈ 20 nm) results in a decrease of the bulk modulus by ≈ 9‰.Сжимаемость высокочистого наноструктурированного cBN была изучена в квазигидростатических условиях при 300 K до 35 GPa в алмазных наковальнях с помощью угловой дисперсионной рентгеновской дифракции синхротронного излучения. Описание полученных данных уравнением состояния Винэ дает значение модуля сжимаемости B₀ = 375(4) ГПа и его первой производной по давлению B₀' = 2.3(3). Наноразмер зерна (~ 20 нм) приводит к уменьшению модуля сжимаемости на ~ 9 %.Стисливість високочистого наноструктурованого cBN була вивчена в квазігідростатичних умовах при 300 K до 35 ГПa в алмазних наковальнях за допомогою кутової дисперсійної рентгенівської дифракції синхротронного випромінювання. Опис одержаних даних рівнянням стану Віне дає значення модуля стисливості B₀ = 375(4) ГПа і його першої похідної по тиску B₀' = 2.3(3). Нанорозмір зерна (~ 20 нм) приводить до зменшення модуля стисливості на ~ 9 %

A portable high-pressure stress cell based on the V7 Paris-Edinburgh apparatus

International audienceWe describe a newdevice, based on aV7 Paris–Edinburgh press, for torsional testing of material at pressures up to 7GPa (extendable to 15 GPa). Samples are deformed using a simple shear geometry between opposed anvils by rotating the lower anvil, via a rotational actuator, with respect to an upper, stationary, anvil. Use of conical anvil profiles greatly increases sample dimensions more than other high-pressure torsional apparatus did. Samples of polycrystalline Zr (2mm thick, 3.5mm diameter) have been sheared at strains exceeding γ∼1.5 at constant strain rate and at pressures from 1.8 to 5GPa, and textural development has been studied by electron microscopy. Use of amorphous-boron-epoxy gaskets means that nearly simple shear of samples can be routinely achieved. This apparatus allows study of the plastic and anelastic behaviour of materials under high pressure, and is particularly suited for performing in situ investigations using synchrotron or neutron radiatio

The high-pressure phase of boron, {\gamma}-B28: disputes and conclusions of 5 years after discovery

{\gamma}-B28 is a recently established high-pressure phase of boron. Its structure consists of icosahedral B12 clusters and B2 dumbbells in a NaCl-type arrangement (B2){\delta}+(B12){\delta}- and displays a significant charge transfer {\delta}~0.5- 0.6. The discovery of this phase proved essential for the understanding and construction of the phase diagram of boron. {\gamma}-B28 was first experimentally obtained as a pure boron allotrope in early 2004 and its structure was discovered in 2006. This paper reviews recent results and in particular deals with the contentious issues related to the equation of state, hardness, putative isostructural phase transformation at ~40 GPa, and debates on the nature of chemical bonding in this phase. Our analysis confirms that (a) calculations based on density functional theory give an accurate description of its equation of state, (b) the reported isostructural phase transformation in {\gamma}-B28 is an artifact rather than a fact, (c) the best estimate of hardness of this phase is 50 GPa, (d) chemical bonding in this phase has a significant degree of ionicity. Apart from presenting an overview of previous results within a consistent view grounded in experiment, thermodynamics and quantum mechanics, we present new results on Bader charges in {\gamma}-B28 using different levels of quantum-mechanical theory (GGA, exact exchange, and HSE06 hybrid functional), and show that the earlier conclusion about significant degree of partial ionicity in this phase is very robust

Effect of nanostructuration on compressibility of cubic BN

Compressibility of high-purity nanostructured cBN has been studied under quasi-hydrostatic conditions at 300 K up to 35 GPa using diamond anvil cell and angle-dispersive synchrotron X-ray powder diffraction. A data fit to the Vinet equation of state yields the values of the bulk modulus B0 of 375(4) GPa with its first pressure derivative B0' of 2.3(3). The nanometer grain size (\sim20 nm) results in decrease of the bulk modulus by ~9%

Rotating tomography Paris-Edinburgh cell:a novel portable press for micro-tomographic 4-D imaging at extreme pressure/temperature/stress conditions

International audienceThis paper presents details of instrumental development to extend synchrotron X-ray microtomography techniques to in situ studies under static compression (high pressure), shear stress or the both conditions at simultaneous high temperatures. To achieve this, a new rotating tomography Paris–Edinburgh cell has been developed. This ultra-compact portable device easily and successfully adapted to various multi-modal synchrotron experimental set-up at ESRF, SOLEIL and DIAMOND is explained in detail. An in-depth description of proof of concept first experiments performed on a high resolution imaging beamline is then given, which illustrate the efficiency of the set-up and the data quality that can be obtained

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns

Performance and Operation of the CMS Electromagnetic Calorimeter

The operation and general performance of the CMS electromagnetic calorimeter using cosmic-ray muons are described. These muons were recorded after the closure of the CMS detector in late 2008. The calorimeter is made of lead tungstate crystals and the overall status of the 75848 channels corresponding to the barrel and endcap detectors is reported. The stability of crucial operational parameters, such as high voltage, temperature and electronic noise, is summarised and the performance of the light monitoring system is presented

Thermodynamic model of hardness: Particular case of boron-rich solids

A number of successful theoretical models of hardness have been developed recently. A thermodynamic model of hardness, which supposes the intrinsic character of correlation between hardness and thermodynamic properties of solids, allows one to predict hardness of known or even hypothetical solids from the data on Gibbs energy of atomization of the elements, which implicitly determine the energy density per chemical bonding. The only structural data needed is the coordination number of the atoms in a lattice. Using this approach, the hardness of known and hypothetical polymorphs of pure boron and a number of boron-rich solids has been calculated. The thermodynamic interpretation of the bonding energy allows one to predict the hardness as a function of thermodynamic parameters. In particular, the excellent agreement between experimental and calculated values has been observed not only for the room- temperature values of the Vickers hardness of stoichiometric compounds, but also for its temperature and concentration dependencies

Calibration of the CMS Drift Tube Chambers and Measurement of the Drift Velocity with Cosmic Rays

Peer reviewe

CMS Data Processing Workflows during an Extended Cosmic Ray Run

Peer reviewe